PAXOS advance Series
II_PAXOS_V001_20161007_EN
31
Installation Instructions
Installation
4.6
Mounting the inner compartment locks
The Paxos advance locks may also be used as inner compartment locks. After opening the door
locks the inner compartment locks can be opened individually later.
When mounting make sure that the locks can be fixed correctly to the inner compartment door
section 4.4 “Mounting the locks”
). Minimum usable thread length must be 5 mm. Additionally
each inner compartment lock requires door bolt contacts. These door bolt contacts must be
connected according to the information given in
section 4.5 “Mounting the door bolt/door position
.
The bus cables to the inner compartment locks must be led and placed suitably. Kinking,
shearing and inadvertent pulling out of the cables must unconditionally be avoided.
Summary of Contents for PAXOS advance Series
Page 62: ......