Kaba PAXOS advance Series, Installation Instructions Manual, Page: 20 / 62

20 II_PAXOS_V001_20161007_EN PAXOS advance Series
Installation Installation Instructions
4 Installation
4.1 Important information prior to installation
CAUTION
Please observe the following:
–
Adherence to the described sequences is mandatory. Improper assembly or a different
sequence can cause damage to the locking system.
–
To prevent any damage, ensure that the connection cables cannot come in contact with
moving parts. Do not route the cables over sharp edges.
–
Do not close the secure storage door before all of the installation steps have been completed
successfully and the system has been placed into operation correctly.
The following notes must mandatory be observed and complied to:
– To ensure VdS compliance, the locks must not be installed directly behind a breakthrough.
–
To comply with the common safety standards, no bus cables must be led out of the protected
area of the safety storage or the input unit.
–
Any damage to the warranty seal on the locks and the optional I/O- or IP-Box invalidates the
warranty claim and certifications (e.g. the VdS certification).
4.2 Unpacking and checking the scope of supply
Unpack the delivery and check the content is complete (based on the delivery slip) and check for
any damage.
Inform the transport company and the business partner immediately of any damage and any
incomplete deliveries.