Programming
Operating Manual
26
k1evo821 - 201606
Kaba mechatronic cylinder surface
Round profile
5.3.1
Programming with media
Mechatronic cylinders can also be programmed using media (cards). The medium is
held in front of the mechatronic cylinder in a special card holder for this purpose.
5 m
m
1.
2.
Beep
3.
1. + 2.
Insert the key into the cylinder briefly approx. 5 mm.
-> The cylinder is activated.
3.
Hold the card holder with the medium in front of the cylinder as shown.
-> The acoustic signal will sound as long as the medium is within the an-
tenna field of the cylinder.
5.4
User media
All User key are organised under a B master.
User key
NOTICE
Lost User key should be immediately blocked and deleted from all components.
(Delete lost User key in the KEM system software in the whitelist (add CardLink to the
blacklist) or delete all User key with the corresponding master and then re-program
all User key).
