OPERATION
Controls
Always trun the hood ON before cooking in order to establish an air flow in the kitchen. After
turing off the range, let the hood run for a few minutes to clear the air.
LCD switch
1. Power on: Switch on the power supply, and the backlight is lit, displaying “24-hour system”. The output
is then blocked up, and the machine enters standby status. The backlight disappear automatically 30
seconds later under the condition of none operation.
2. Press “Lamp” key: Press the indicator key once, the indicator
on the LCD screen is lit and lights on.
Press it for a second time, indicator
on the LCD screen distinguished and the lights off. The
Lamps work independently, not controlled by Timer and Power.
3. Power on key
, the motor is provided with three speeds, i.e. low, medium and high.
1) Press key
,
is displayed on the display screen, and the motor start working on low speed,
key
also lit.
2) Press
key when the motor is working on the low speed, motor transfers to medium speed.
keep lit and work.
3) Press
key when the motor is working on medium speed, and motor transfers to high speed,
key keep lit and work.
4) It could be chose “low speed-medium speed-high speed-low speed-medium speed……”by
key
under working position..
4. Press key
, the motor is adjusted. Press key
again, the motor stop. Key
and
power off on display.
5. Timer key
: it has been set on 12:00, when power off, it also show 12:00.Customer need to set the
time again.
1) When lamp button and speed button don’t work, the timer key is used for time setting.
A) Long press timer key
for 2-5 seconds, time segment
,and the first two hour bit segment
flash, use key
for the digit increase, use
key for the digit decrease. Namely: The variable
is 01 each time when it is pressed; the hour segment is with the largest digit of 23. If it exceeds 23,
key is null and void. If it is equal to 00, then the
key is null and void.
B) Press the timer key
for the 2
nd
time, time segment
, and the last two minute bit segment
flash, se key
for the digit increase, use
key for the digit decrease. Namely: The variable
is 01 each time it is pressed; the hour segment is with the largest digit of 59. If it exceeds 59,
key is null and void. If it is equal to 00, then the
key is null and void.
C) Press the timer key
for the 3
rd
time, and it is the time setting confirm and exit.
D) Long press timer key
for 2-3 seconds under this operation mode, and it is for the hour setting;
Press it for the 2
nd
time: Setting for the minute; Press it for the 3
rd
time: For the time setting exit and
confirm, and it will be repeated again and again (if the 1
st
time pressing doesn't exceed 2 seconds, then it
can't run this operating procedure.)
