INSTALL THE HOOD
opening on the back of the hood
with the wall-mounting bracket. Gently lower the hood
until it securely engages the bracket.
Open the Al. filter and find the two
φ
8 mm holes
on the back of the hood. Level the hood with 2
mounting screws (4*35mm) with washer. Use drywall
anchors provided.
Measure the height of the glass to the slidery duct
fixing support. Adjust the height of the chimney
eys.
Shown as in the pic.
imney on the hood, use two screws(4x8mm)to
fix the chimney to the slidery duct fixing support.
Use the other two screws (4x8mm) to fix the bottom of
chimney.
After adjusting the position, open the filter and fix the
with safety screws.
ote: The two safety vents are positioned on the back
diameter of 6mm.
Note: at least two people will be required to mount
the hood.
1. Raise the hood into its mounting position.
2. Align the rectangular
3.
4.
according to the height. Then use the duct fixing
suppor with two screws (4x8mm) to fix the chimn
4x8mm
5. Put the ch
Screw
6.
7.
body inside
N
casing, with