PREPARE THE HOOD
Screw: 4x8mm
Note: On stainless steel hoods, carefully remove
the plastic protective film from all exterior surfaces
of the hood and decorative flues, prior to final
installation.
5. Pick out the hood from the carton.
6. Install the vent into the duct connector of the cooker
hood.
7. Fix the extensive pipe onto the vent.
INSTALL THE HOOD
Note: at least two people will be
required to mount the hood.
1. Raise
the hood into its mounting
position.
2. Align the rectangular opening on the
back of the hood with the
wall-mounting bracket. Gently lower
the hood until it securely engages the
bracket.
3. Open the Al. filter and find the two
φ
8
holes on the back of the hood. Level
the hood with 2 mounting screws
(4*35mm) with washer. Use drywall
anchors provided.