LCD electric control
1. Power on: Switch on the power supply, and the backlight is lit, displaying “24-hour system”. The
output is then blocked up, and the soot machine enters standby status. The backlight disappear
automatically 30 seconds later under the condition of none operation.
2. Press “Lamp” key: Press the indicator key once, the indicator is lit, and
on the LCD screen is
lit. Press it for a second time,
of the indicator and the LCD screen will distinguish, and it will
be repeated again and again. The Lamp work independently, not controlled by Timer and Power.
3. Power on key
, the motor is provided with three positions, i.e. low, medium and high.
1) Press
key
,the
is displayed on the display screen, and the motor start work, it is the
low position (power on position),and the key
also lit.
2) Press
key once more at the low position, and it transfer to medium position.
key
keep lit and work.
3) Press
key once more at the medium position, and it transfer to high position,
key
keep lit and work.
4) It could be chose “low position-medium position-high position-low position-medium
position……”by
key under working position..
4. Press key
,the motor is adjusted., press key
once more, the motor is stopped.
icon
and
power off on display.
5. Timer key
: it has been set on 12:00, when power off, it also show 12:00.Customer need to set
the time again.
1) The timer key is the timer setting key if the speed and lamp don’t work at both position.
①
Long press timer key
for 2-5 seconds, time segment
,and the first two hour
bit segment flash, use key
for the digit increase, use
key for the digit decrease.
Namely: The variable is 01 each time it is pressed; the hour segment is with the largest digit
of 23. If it exceeds 23,
key is null and void. If it is equal to 00, then the
key is null and
void.
②
Press the timer key for the 2nd time
, time segment
, and the last two minute bit
segment flash, se key
for the digit increase, use
key for the digit decrease. Namely:
The variable is 01 each time it is pressed; the hour segment is with the largest digit of 59. If it
exceeds 59,
key is null and void. If it is equal to 00, then the
key is null and void.
③
Press the timer key
for the 3rd time, and it is the time setting exit and confirm key.
④
Long press timer key
for 2-3 seconds under this operation mode, and it is for the
hour setting; Press it for the 2nd time: Setting for the minute; Press it for the 3rd time: For
the time setting exit and confirm, and it will be repeated again and again (if the 1st time
pressing doesn't exceed 2 seconds, then it can't run this operating procedure.)
2) The timer key is the timer setting key when the motor is working. When only press Lamp key,
the timer key is null and void.
①
Press timer key, enter the setting display. 1st time setting is 5 min. Use speed key for
increase gradually, use lamp key for decrease gradually, the time should be set 1:00—60:00
min. Finish setting, press timer key to confirm.
②
Example: Let the setting time be 5min, the display is 5:00, 4:59, …00:1, with 0:00 displays
per minute, and once “00: 00” appears, the motor position and the indicator power supply
will be cut off automatically, (the display screen displays “24-hour system”, the output is
blocked up, and the soot machine enters standby status, and the backlight will be put out
automatically 30 seconds later.)
③
When use time setting next time, press timer key and not change timer setting, the soot
machine will keep the time automatically . 5 min later, it starts to decrease gradually. If reset
the time, it will work for new time.
