4. Put the glass in the lead way, use four
screws (4x25mm) with glass washer
and rubber washer to fix the glass.
(Note: the screws and washers should
be install as shown.)
5. Measure the height of the glass to the slidery duct fixing
support. Adjust the height of the chimney according to
the height. Then use the duct fixing suppor with two
screws (4x8mm) to fix the chimneys. Shown as in the pic.
6. Put the chimney on the hood, use two
screws(4x8mm)to fix the chimney to the
slidery duct fixing support.
