INSTALL THE HOOD
Note: at least two people will be required to mount the
hood.
1. Raise the hood into its mounting position.
2. Align the rectangular opening on the back of the hood
with the wall-mounting bracket. Gently lower the hood
until it securely engages the bracket.
3. Open the Al. filter and find the two
φ
8 mm holes on the
back of the hood. Level the hood with 2 mounting screws
(4*35mm) with washer. Use drywall anchors provided.
4. Measure the height of the glass to the slidery duct fixing
support. Adjust the height of the chimney according to the
height. Then use the duct fixing suppor with two screws
(4x8mm) to fix the chimneys. Shown as in the pic.
5. Put the chimney on the hood, use two screws(4x8mm)to
fix the chimney to the slidery duct fixing support.
6.Use the other two screws (4x8mm) to fix the bottom of
chimney.
7. After adjusting the position, open the filter and fix the
body inside with safety screws.
Note: The two safety vents are positioned on the back
casing, with diameter of 6mm.
4x8mm