12 of 40
Set Zone Run Times
®
ZONE RUN TIME
is the
length of time each zone
(valve) is scheduled to water
on a particular
PROGRAM
®
Maximum watering time is
12 hrs 59 min for each
ZONE
®
A zone can be assigned
to any or all of the
possible 5
PROGRAMS
1. Turn the dial to
ZONE RUN TIMES
®
ZONE No. 1
[l] will be
flashing labelled as
OFF
,
as shown above, meaning
it has no
RUN TIME
programmed in it
L
The controller has
permanent memory so if
there is a power failure, even
if the battery is not installed,
the programmed values
will be restored to the unit
2. Press or to select
a zone (valve)
3. Press and
OFF
will flash
4. Press or to
adjust the
RUN TIME
minutes
as desired
5. Press and the
RUN TIME
hours
will flash
6. Press or to adjust the
RUN TIME
hours
as desired
7. Press and the
ZONE No.
will flash again
8. Press or to select
another zone (valve), and
repeat steps 2-7 above
to set a
RUN TIME
Programming
(continued)
l
m
Summary of Contents for KRC 9
Page 1: ...User Manual 5 WARRANTY ...
