Dewert User Manual 2690XLE/2695XLE/2890XL/2895XL – Updated 11.2021/3 MDR Page 9 of 15
Models 2690XLE, 2695XLE 5.0A
Protection class:
II (protective insulation), connecting cable without protective conductor
Protection rating:
IP X44
– resistant to water splashes,
Degree of protection:
B
The motor is maintenance free.
When operated with sinusoidal alternating voltage, the motors used do not cause field or line-borne interference
within the meaning of EN 50081, Part 1 and 2, nor can their function be impaired by electromagnetic influences
within the meaning of EN 50082, Part 1 and 2.
4.3 Technical data for hydraulic system
Manufacturer:
Power-Packer Europa B.V., NL-7575 AT Oldenzaal
Type:
Compact MK5 long
Mode of operation:
Hydraulic cylinder with pump
The hydraulic unit is maintenance free.
5. Cleaning instructions
Upholstery covering
There are two different collections of upholstery covering to choose from:
•
Skai Pandoria Plus (manufactured by Hornschuch/Continental in Germany)
•
Skai Toronto EN (manufactured by Hornschuch/Continental in Germany)
For cleaning and disinfection, a selection of agents from various manufacturers has been tested for
compatibility. Please refer to the separate enclosed sheet.
The table is equipped as standard with the
Dewert hygiene standards
, which enable optimal cleaning and
disinfection:
•
Hinge lids are made of the identical upholstery covering
•
All undersides of the upholstery parts are coated with an upholstery covering and can thus be cleaned
and disinfected
•
Vent holes underneath the upholstery:
For the homogeneous foam to recover quickly, a rapid exchange of air is necessary. To ensure this, there
are individual vent points on the underside of the upholstery, which are hygienically sealed with special air
compensation caps that assume a valve function.
•
Easy hygiene due to an open design
•
Optional: Upholstery covering Skai Toronto EN with staynu
Table frame
The plastic-coated table frame and the chrome-plated bars and levers can be cleaned with mild household
cleaners, if necessary. Do not use aggressive, abrasive or corrosive agents. Heavily soiled chrome-plated
parts can be cleaned with a chrome polish (e.g. Sidol). After cleaning, dry the frame with a soft dry cloth. Seal
deep scratches and worn areas with suitable repair agents to prevent moisture penetration.
Important:
At tables with hydraulic height adjustment as well as for the gas springs, wipe the piston rod with a soft cloth
at regular intervals. This prevents dust from entering through the dust lip and preserves the service life of the
unit.
