1
Owner’s Manual
Please read this manual and follow its instructions carefully. The words
WARNING, CAUTION, and IMPORTANT carry special meanings and should be
carefully reviewed.
WARNING - Failure to read, understand and follow all
warnings and instructions listed could result in serious injury or death to
self or others.
CAUTION - These instructions point out special safety
procedures or precautions that must be followed to avoid damaging the
augers, injuries to self and others.
IMPORTANT - This provides special information to make usage of the K-Drill
easier and important instructions more clear.
Table of Contents
Product Introduction
1
Drill Setup
3
Attaching to the Drill
3
Drilling Ice Holes
4
Redrilling Holes
5
Safety & Usage Tips
6
Replacing the Blades
8
Free Lifetime Sharpening
9
Parts & Accessories
10
Cordless Drill Requirements
11
Specifications
11
Limited Warranty
13
K-Drill Patent #7,946,355
Introducing the K-Drill Ice Auger
Efficiency and light weight performance best describes the K-Drill Ice Auger. Both
the 6” and 8” K-Drill Ice Augers are designed to be driven with rechargeable elec-
tric drills or gas power heads.
The unique center tip and high carbon steel chipper blades allow for quick and
clean holes under all ice conditions. K-Drill will also work exceptionally well when
re-opening existing holes.
The K-Drill has its own flotation system to prevent it from sinking down the hole if
it should come detached from the drill. The 6-inch K-Drill Ice Auger cuts a 6” hole.
However, the 8-inch K-Drill cuts a 7-1/2” hole.
