K-BUS
®
KNX/EIB
Power Supply
4
3.2. Connection Diagram
1. Reset push button
2. Red LED (Reset)
3. Bus connection terminal (KNX output)
4. Connection terminal (auxiliary voltage output)
5. Mains supply
ON: Green LED
（
output voltage is OK
）
I>I
max
: Red LED
（
overload/ short circuit
）
Chapter 4 Normal Working Test
When power supply
has been correctly installed,
switch on the main power supply for the bus
power,and
the green LED “ON”, all other LEDs are switched off, that is, the device function correctly.
