KU212
Ver. 1.0
12
11. TEChNICAL SPECIFICATIONS
ACOUSTICS
Power handling
700 W
Impedance
4 / 16
Ω
selectable (2 x 8
Ω
)
Frequency range (-10 dB)
35 Hz – 150 Hz
(1)
SPL 1W/1mt
100 dB
(2)
Maximum SPL
124 dB (cont.) – 130 dB (peak)
(3)
COVERAGE
Horizontal
omni
Vertical
omni
CROSSOVER
Type
External crossover required
Frequency
Low pass @ 150 Hz
TRANSDUCERS
Type
1 x 12” neodymium magnet woofer with 2” voice coil
Type
1 x 12” passive transducer
POWER AUDIO IN/OUT
Connectors
1 x 4-pin phoenix connector
Wiring
Serial or parallel
RECOMMENDED AMPLIFIERS
Type
KA24, KA84
CERTIFICATION
IP
54 (More complete water protection with K-KUIP accessory)
PHYSICAL
Dimensions
65.0 cm x 33.0 cm x 20.0 cm (25.8“ x 13.0” x 7.9“)
Weight
18.5 kg (40.8 lbs)
Notes for data
1. With dedicated preset;
2. Measured @4 mt then scaled @1 mt;
3. Measured with musical signal
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
