5
KMC50-JOINT multiple unit connection hardware
J. 1x KMC50-JOINT accessory
K. 2x M2 screws
K-FLYM5 flybar for suspending and aiming microphone arrays
L. 1x K-FLY5 flybar with cable and MiniXLR connector
M. 1x M2 screw
K-BRK50 bracket compatible with Rycote InVision INV-1
adapter (not provided)
N. 1x K-BRK50 bracket
O. Rycote InVision INV-1 adapter (NOT INCLUDED)
Getting Started
Unpack the Capture-KMC50 microphone and its accessory kits.
A preamplifier kit is required! Select either the K-PREMC01
or the K-PREMC02 preamplifier kit according to the number
of microphone units and the configuration you want to make.
Single unit
1. Assembly the Capture-KMC50 microphone and the female adapter
with cable and MiniXLR connector supplied in the K-PREMC01
preamplifier kit (see
Single-unit microphone assembly, page 6
).
2. Plug the top cap on the Capture-KMC50 microphone.
3. Connect the MiniXLR connector to the K-PREMC01 single unit
preamplifier.
4. According to the type of application:
• Stand mounting applications: mount the K-BRK50 bracket on the
Capture-KMC50 microphone assembly and set it on the Rycote
InVision INV-1 adapter.
• Surface mounting applications: slip the Capture-KMC50
microphone on the foam brackets: four screws are provided for
fixing the foams to the surface.
5. Plug the microphone to the input device and switch on the Phantom
power (see
).
Multiple units
1. Assembly the Capture-KMC50 microphones and the KMC50-
JOINT according to the desired array configuration (see
).
2. According to the type of application:
• Custom bracketing: plug the female adapter with cable and MiniXLR
connector supplied in the K-PREMC02 preamplifier kit to one end of
the Capture-KMC50 microphone line array.
• Suspended microphone line array: plug the K-FLYM5 flybar to one
end of the Capture-KMC50 microphone line array.
3. Plug the microphone cap on the opposite end of the Capture-KMC50
microphone array.
4. Connect the MiniXLR connector to the K-PREMC02 preamplifier.
5. Connect a reliable 5 V 500 mA power supply to the K-PREMC02
preamplifier (see
).
6. Plug the K-PREMC02 microphone preamplifier to the input device and
switch on the Phantom power.
K-WIND150 Rycote accessory for maximum isolation from
wind and handling noise.
Capture-KMC50
User Guide
J
M
N
K
L
O
Summary of Contents for Capture-KMC50
