20
◦ The Win7 32-bit management engine driver is located in the directory: x:\Driver
Installation\PXI Platform\PXI controller\PXIe-63985\Win7_32bit\ME\
◦ The Win7 64-bit management engine driver is located in the directory: x:\Driver
Installation\PXI Platform\PXI controller\PXIe-63985\Win7_64bit\ME\
3. Execute MEI_ALLOS_6.1.0.1042_PV.exe or setup.exeand follow on-screen
instructions to complete the setup.
4. Reboot the system
3�7 Installing the PXI Trigger Driver
The PXIe-63985 controller provides a trigger I/O on the faceplate to route the trigger signal
to and from the PXI trigger bus. Please see Appendix A: PXI Trigger I/O Function Reference
for programming information.
To install the PXI trigger driver:
1. Close any running applications.
2. Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver)
◦ The Win7 32-bit PXI trigger driver is located in the directory: x:\Driver Installation\
PXI Platform\PXI controller\PXIe-63985\Win7_32bit\TriggerIO\
◦ The Win7 64-bit PXI trigger driver is located in the directory: x:\Driver Installation\
PXI Platform\PXI controller\PXIe-63985\Win7_64bit\TriggerIO\
3. Execute PXI Trigger IO setup v330.exe and follow on-screen instructions to complete
the setup
4. Reboot the system
3�8 Installing the USB 3�0 Driver
The PXIe-63985 controller provides two USB 3.0 ports on the faceplate. To install the USB
3.0 drivers:
1. Close any running applications.
2. Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver)
◦ The Win7 32-bit USB 3.0 driver is located in the directory: x:\Driver Installation\
PXI Platform\PXI controller\PXIe-63985\Win7_32bit\USB30\
◦ The Win7 64-bit USB 3.0 driver is located in the directory: x:\Driver Installation\
PXI Platform\PXI controller\PXIe-63985\Win7_64bit\USB30\
3. Execute setup.exe and follow on- screen instructions tocomplete the setup
4. Reboot the system
3�9 Installing the SMBus Driver
To install the SMBus driver:
