background image

30

Important Safety Instructions

For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and NOTES 

marked in this manual and on the associated equipment before handling/operating the 

equipment.

•  Read these safety instructions carefully.
•  Keep this user’s manual for future reference.
•  Read  the  specifications  section  of  this  manual  for  detailed  information  on  the 

operating environment of this equipment.

•  When installing/mounting or uninstalling/removing equipment:

 

◦ Turn off power and unplug any power cords/cables.

•  To avoid electrical shock and/or damage to equipment:

 

◦ Keep equipment away from water or liquid sources;

 

◦ Keep equipment away from high heat or high humidity;

 

◦ Keep equipment properly ventilated (do not block or cover ventilation openings);

 

◦ Make sure to use recommended voltage and power source settings;

 

◦ Always install and operate equipment near an easily accessible electrical socket-

outlet;

 

◦ Secure the power cord (do not place any object on/over the power cord);

 

◦ Only  install/attach  and  operate  equipment  on  stable  surfaces  and/or 

recommended mountings; and,

 

◦ If the equipment will not be used for long periods of time, turn off and unplug the 

equipment from its power source.

•  Never attempt to fix the equipment. Equipment should only be serviced by qualified 

personnel.

•  A Lithium-type battery may be provided for uninterrupted, backup or emergency 

power.

Risk of explosion if battery is replaced with an incorrect type; 
please dispose of used batteries appropriately.

•  Equipment must be serviced by authorized technicians when:

 

◦ The power cord or plug is damaged;

 

◦ Liquid has penetrated the equipment;

 

◦ It has been exposed to high humidity/moisture;

 

◦ It is not functioning or does not function according to the user’s manual;

 

◦ It has been dropped and/or damaged; and/or, 

 

◦ It has an obvious sign of breakage.

Summary of Contents for PXIe-62780




































Reviews: