22
3.6 Installing the Management Engine Driver
To install the management engine driver:
1. Close any running applications.
2. Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver)
◦ The WinXP ME driver is located in the directory x:\ Driver Installation\PXI
Platform\PXI controller\PXIe-63975\ME\WinXP\Intel ME
◦ The Win7 ME driver is located in the directory x:\ Driver Installation\PXI
Platform\PXI controller\PXIe-63975\ME\Win7\Intel ME
3. Execute MEI_ALLOS_6.1.0.1042_PV.exe or setup.exeand follow on-screen
instructions to complete the setup.
4. Reboot the system
3�7 Installing the PXI Trigger Driver
The PXIe-63975 controller provides a trigger I/O on the faceplate to route the trigger signal
to and from the PXI trigger bus. Please see Appendix A: PXI Trigger I/O Function Reference
for programming information.
To install the PXI trigger driver:
1. Close any running applications.
2. Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver);
the PXI trigger driver is located in the directory x:\ Driver Installation\PXI Platform\
PXI controller\PXIe-63975\PXI_Trigger\ PXI Trigger 3.23
3. Execute PXI Trigger IO setup v323.exe and follow onscreen instructions to complete
the setup
4. Reboot the system
3�8 Installing the WDT Driver
The WDT (watchdog timer) resets the system when the operating system or application is
halted. The WDT typically starts and periodically resets the timer, and when the timer is
expired, the system resets. Please refer to Appendix B: Watchdog Timer for programming
information.
To install the WDT driver:
1. Close any running applications.
2. Insert the JYTEK All-in-One USB Flash Driver (x: denotes the USB driver);
the WDT driver is located in the directory x:\ Driver Installation\PXI Platform\PXI
controller\PXIe-63975\PXI_WDT\ PXI WDT 3.23
3. Execute PXI WDT Setup v323.exe and follow on-screen instructions to complete the
setup
4. Reboot the system
