15
2.3.11 Installation Environment
When preparing to install any equipment described in this manual, please refer to Chapter:
Important Safety Instructions.
Only install equipment in well lit areas on flat, sturdy surfaces with access to basic tools
such as flat- and cross-head screwdrivers, preferably with magnetic heads as screws and
standoffs are small and easily misplaced.
Recommended Installation Tools
Phillips (cross-head) screwdriver
Flat-head screwdriver
Anti-static wrist strap
Anti-static mat
JYTEK PXIe-63975 system controllers are electrostatically sensitive and can be easily
damaged by static electricity. The equipment must be handled on a grounded anti-static
mat, and operators must wear an anti-static wristband, grounded at the same point as the
anti-static mat.
Inspect the carton and packaging for damage. Shipping and handling may cause damage to
the contents. Ensure that all contents are undamaged before installing.
All equipment must be protected from static discharge and physical shock. Never
remove any of the socketed parts except at a static-free workstation. Use the
antistatic bag shipped with the product to handle the equipment and wear a
grounded wrist strap when servicing or installing.
