PCIe/PXIe-6301 Series |
| 36
When theReTriggerCount is set to -1, it will wait on trigger infinitely until aborting the
task.
M Samples
M Samples
1st trigger
2nd trigger
Start
Time
N trigger
Trigger
Data
Figure 21 Retrigger mode
Learn by Example 4.5.2 and 4.5.3
◼
Connect the PT100’s positive pole to AI+ (Pin#35), the negative poles to AI
- (Pin#1)
and Ex- (Pin#36), then connect the signal s
ource’s positive pole and negative pole
to PCIe/PXIe-6301 PFI2 (Pin#66) and D_GND (Pin#30);
◼
Set the signal source Ch1’s output t
o square wave (f=1Hz, Vpp=5v);
◼
Open
Winform AI Finite Digital Trigger
, set the following numbers as shown.
Figure 22 Retrigger Paraments
