JYTEK 6743X Series, User Manual

Page: 14 / 42

8 Getting Started
2.2 Unpacking
The PCI-67432/33/34 card contains electro-static sensitive com -
ponents that can be easily be damaged by static electricity.
Therefore, the card should be handled on a grounded anti-static
mat. The operator should be wearing an anti-static wristband,
grounded at the same point as the anti-static mat.
Inspect the card module carton for obvious damage. Shipping and
handling may cause damage to your module. Be sure there is no
shipping and handling damage on the modules carton before con -
tinuing.
After opening the card module carton, extract the system module
and place it only on a grounded anti-static surface with component
side up.
Again, inspect the module for damage. Press down on all the
socketed IC's to make sure that they are properly seated. Do this
only with the module place on a firm flat surface
Note
:
DO NOT ATTEMPT TO INSTALL A DAMAGED BOARD IN
THE COMPUTER
.
You are now ready to install your card.