JWA 71787 Manual Download Page 4

Weight Restrictions

This product will structurally support weights up to  

650lbs  (295kgs). 

This limit is inclusive of any mattress and bedding placed on it. 
The bed will structurally support this weight, provided it is evenly distributed across the bedframe. 
This product is not designed to support or lift this weight in the head or foot sections alone. 
Exceeding the weight limit could damage the bed and/or cause injury and will void the warranty.

The motors are not designed to operate continuously for more than 

one (1) minute

 in an 

eight (8) minute

 time period. 

Attempting to exceed this rating will shorten the life expectancy of the bedframe and will void the warranty.

Product Rating

Components

1 pc

1 pc

1 pc

6 pcs

6 pcs

6 pcs

1 set

     the bedframe, mattress et al. But life happens! And if you end     
     up spilling, stand in a dry, clean area of the floor and unplug 
     the bed immediately. Clean up spill (remember what your 
     mama taught you) and allow the area around bed to dry 
     thoroughly before using the electric controls again. If you 
     aren’t great at cleaning up, then we recommend that you just 
     don’t eat or drink hot liquids while operating the bed. 
      
 •   Let kids be kids! So do the adult-like thing and don’t allow 
      them to operate the bed without supervision.
 
 •   While this bed is cool, it’s not safe for gymnastics. So when 
     you operate this bedframe, please make sure body is 
     positioned within the confines of the bed. Even if you like    
     living on the edge, please do not place extremities over the 
     sides of the bed when operating bedframe functions. 
 
•   Do not weigh down any one part of your bed; distribute body                                              
     weight evenly at all times and always return the bed to a flat 
     position before getting in and out.

Adjustable Bedframe

03

Summary of Contents for 71787










Reviews: