JVC VN-X35U - Network Camera, Instructions Manual, Page: 61 / 111

61
Privacy Mask Page
Privacy Mask is a feature that enables masking of a portion of the image.
VN-X35U enables unlimited privacy masks to be specified in different shapes at your favorite locations.
The Privacy Mask masks area by uploading a BMP file painted in red (created separately). The
displayed color is determined by the color specified on this page.
This page can be used during access using
A
admin
B
or
A
operator
B
.
●
First of all, configure the encoding settings.(
A
Page 39)
●
Click [Advanced Settings] to display setting menu.
●
Click [Privacy Mask].
●
Press the [OK] button to enable the new settings.
●
If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Note:
●
his feature can be used when the distribution size pattern setting on the Encoding page is set to
B
(MPEG4 only),
E
(JPEG only), or
G
. (
A
Page 39)
Memo:
●
[Privacy masks cannot be used when [MONITOR OUT] selection switch is set to NTSC or PAL.
Set the privacy mask to
A
Off
B
. After changing the [MONITOR OUT] switch setting, press the
[RESET] button for less than 2 seconds to reboot the camera.
A
B
C
D
Mask Color Settings Screen
Click