115
Auto Trace Setting
This item stores and reproduces manual operation.
Click the [Auto Trace] tab on the [PTZ Controller] screen and configure settings at the [Auto Trace]
setting screen.
Note
：
●
As Auto Trace performs simple saving of manual operation, the position may be shifted during playback.
●
A
Digital Flip
B
cannot be used during Auto Trace recording. [Auto Flip] (
A
B
C
Click the [Auto Trace] tab to display the [Auto
Trace] screen.
Click [Record Start].
The camera will start recording of Pan/Tilt and
Zoom operations. (for approximately 30 seconds)
Memo
:
●
For details on the manual operation, see
[Operation] (
When manual operations are completed, click
[Record Stop].
[State] Display
The current status is displayed.
Standby
: The camera is on standby. [Record
Stop] is invalid.
Recording : The camera is recording. Click
[Record Stop] to finish recording.
A
Completed
B
will be displayed.
Completed : Recording is completed. After
A
Completed
B
is displayed for 3
seconds,
A
Standby
B
will be
displayed.
Timeout
: 30 seconds has passed since
recording started. (Operation for the
30 seconds has been recorded.)
After
A
Timeout
B
is displayed for 3
seconds,
A
Standby
B
will be
displayed.
Memory Full
: The operation has exceeded the
number of recordable operations.
Further recording cannot be made
even if it is within 30 seconds.
(Operations before the limit are
recorded.) After
A
Memory Full
B
is
displayed for 3 seconds,
A
Standby
B
will be displayed.
Summary of Contents for VN-V686WPU
