113
Auto Pan Setting
This item sets the Auto Pan operation which moves at a certain speed from the configured [Start
Position].
Click the [Auto Pan] tab on the [PTZ Controller] screen and configure settings at the [Auto Pan] setting
screen.
C
A
D
B
E
Click the [Position Memory] tab to display the
[Position Memory] screen.
Select [Position].
[Setting values : HOME, 0 to 99]
The current title appears.
Enter here to register or change the title.
(Up to 32 alphanumeric characters can be
entered.When Built-in JPEG Viewer is used,
up to 16 alphanumeric characters are
displayed.)
Operate the camera and adjust the angle and
image quality of the position to be registered.
Memo
:
●
For details on the adjustment method, see
[Operation] (
Click [Register] to complete registering the
position.
Memo
:
●
Click [Delete] to delete information of the
selected position. However, [HOME] cannot
be deleted.
●
The default home positions are Pan 1.00
degrees, Tilt 45 degrees, and Zoom 1x.
Return
Rig
ht
Left
[Return
Positio
n]
[Sta
rt Po
sitio
n]
Summary of Contents for VN-V686WPU
