JVC VN-V686WPU Instructions Manual Download

Page: 111 / 121

111

Intelligent Tracking (Manual Mode)

This function allows you to track and shoot the color information of an object, which was selected by
clicking on the viewer screen.

Memo

●

You can change the tracking target any time by clicking the object while

Locked

Losing

displayed.

●

You can select whether to display [Tracking Frame] (JPEG Viewer only) or [Tracking Status] on the
setting screen. (

Page 97)(

Page 102)

Note

：

●

When the PC OS is Windows XP, click the viewer screen once to activate. Then click the object to be
tracked.

Standby

Locked

Select [Intelligent Tracking].

Click [Start]

●

The camera will go into Standby mode and

Standby

will be displayed on the top right

of the viewer screen.(JPEG Viewer)

●

The camera will go into Standby mode and

Standby

will be displayed on the title

bar.(MPEG4 Viewer)

Click the object to be tracked on the viewer screen.

●

The object will be framed in blue [Tracking
Frame]. (JPEG Viewer only)

●

While the object is being captured,

Locked

will be displayed on the top right of the
viewer screen. When the camera loses the
object,

Losing

will be displayed. (JPEG

Viewer)

●

While the object is being captured,

Locked

will be displayed on the title bar. When the
camera loses the object,

Losing

will be

displayed. (MPEG4 Viewer)

JPEG Viewer screen

MPEG4 Viewer screen

Summary of Contents for VN-V686WPU


























































































































Search results

Summary of Contents for VN-V686WPU

Reviews:

Related manuals for VN-V686WPU

Brands by name

Popular brands

JVC VN-V686WPU, Instructions Manual

Search results

Summary of Contents for VN-V686WPU

Reviews:

Related manuals for VN-V686WPU

Brands by name

Popular brands