SNMP
For setting SNMP.
[Set values: ON,
R
OFF]
AMX Device Discovery Protocol
You can change the AMX device detection
protocol. Set to “ON” when you are using the
camera on AMX’s system.
[Set values:
R
ON, OFF]
Standard Surveillance Protocol
Sets standard surveillance protocols.
ONVIF
You can change the standard surveillance
protocols.
[Set values:
R
ON, OFF]
JPEG Streaming
Selects the JPEG image streaming priority.
Priority
Selects whether to give priority to the client number
for JPEG image streaming or the frame rate.
0
Client Number:
Gives priority to the streaming client number.
Lowers the JPEG frame rate as delivery
requests increase, allowing delivery to a
maximum of 20 clients.
0
Framerate:
Assigns priority to the frame rate. Set this to
maintain the frame rate for JPEG images
requested by clients. Delivery requests that
exceed the maximum number will be denied.
[Set values:
R
Client Number, Framerate]
[Multicast] Page
This page is for setting manual multicast
transmission.
All items can be set when you log in as “admin”.
If you log in as “operator”, you are only allowed to
start or stop transmission.
0
When you are logged in as “admin”, press the
[OK] button to save changes made on this page.
0
When you are logged in as “admin”, a warning
message will appear if you press the [OK] button
upon entering an invalid value, and the entry will
be denied. Press the [Cancel] button to restore
the invalid entry to the value before the change
was made. If you press the [Cancel] button,
other changed items will also be restored to the
values before the change was made.
Memo :
0
When the power of the camera is turned off
accidentally during multicast transmission,
multicast transmission will restart automatically
after the camera is rebooted.
Settings
.
* Setting values with
R
are default values.
Encoder
No.1 to No.3
For setting manual distribution by Encoder
No.1 to
No.3.
Memo :
0
Only the setting options for the encoder in
operation will be displayed.
Encode
Displays the [Encode] settings specified for each
encoder.
[Displayed values: JPEG, H.264 Baseline, H.264
High]
58
[Advanced Settings] Page - [Protocol] Page
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
