
66
Internet Explorer Setting
Maintenance Page
This page maintains the camera system.
This page can be used during access using
A
admin
B
.
* The [Set values] in bold letters are factory defaults.
Settings (continued)
B
C
D
E
Click [Advanced Settings] and [Maintenance].
A
Lens (VN-H37U only)
Selects the lens type and adjusts the lens.
Lens Type
Select the lens type of camera.
If you press the [Apply] button after selecting a lens type, the setting will be saved.
1 (TAMRON) : Select this type to use a Tamron lens.
2 (FUJNON) : Select this type to use a Fujinon lens.
[Set values: 1 (TAMRON)
, 2 (FUJNON)
]
B
Restart, Initialize
Restarts the camera and initializes the set values of the camera.
Restart
Restarts the camera.
The camera takes about 1 minutes and 30 seconds to restart.
All Settings
Clicking [Initialize] restores all settings to the factory defaults, and restarts the camera.
It takes approximately 1 minutes and 30 seconds to initiaIt takes about 1 minute to format
a 32GB SD card. Do not remove the SD card during formatting.lize and restart the camera.
All passwords are initialized as well. However, the time of the clock built in the
camera is not reset.
Current services such as JPEG/H.264/MPEG-4 streaming are all stopped.
For factory defaults, see the "List of Factory Defaults of Each Page". (
Summary of Contents for VN-H237VPU
