JVC VN-H237VPU, Instructions Manual

Page: 39 / 114

39
If
A
Storage Mode is set to "FTP Record", FTP Record options will be displayed.
* The [Set values] in bold letters are factory defaults.
A
Storage Mode Selects a record mode. Depending on the selected record mode,
B
options vary.
[Set values: OFF , FTP Record, SD Card Record ]
B
FTP Server Sets an IP address of FTP server or FQDN.
C
Path Sets a path name. If the [Path] is left blank, the FTP transfer is
made to the home directory of FTP server.
Memo:
●
To make an FTP transfer to a directory locating under the
home directory:
Sets the directory name in the [Path] field.
Separate directories by delimiter
A
/
B
from each other.
Example: subdir1/subdir2
●
If
A
/
B
is set at the beginning of directory name, the destination
directory of FTP transfer depends on the FTP server.
D
User Name Enters a user name.
E
Password Enters a password. When a user name is specified,
A
******
B
will
be displayed.
F
FTP Record Mode Sets an FTP recording mode.
Depending on the selected FTP recording mode,
G
options vary.
Constant : Transfers JPEG images to the FTP server at each
specified time.
Alarm : Transfers JPEG images around the time when the specified
conditions are met to the FTP server.
CAlarm : Enables both Constant and Alarm.
[Set values: Constant, Alarm, CAlarm]
G
Constant Sets the continuous recording.
Encoder Selects an Encoder for continuous recording.
Memo:
●
You can select an Encoder No. for JPEG file encoding.
Interval Sets a recording interval by seconds.
[Set values: 1 to 65535 sec ]
File Naming You can select any of three (3) formats of recording file names.
If you select
A
Auto
B
, a file name is created based on the year,
month, day, hours, minutes, seconds, and a number.
Example: 20111114161032-001-2.jpg
If you select
A
Manual1
B
, a file name is created based on the user-
defined character string which is added by year, month, day,
hours, minutes and seconds.
Example: Camera1_20111114161032001.jpg
If you select
A
Manual2
B
, a file name is created based on the user-
defined character string only.
Example: Camera1.jpg
[Set values: Auto , Manual1, Manual2 ]