JVC VN-H237VPU, Instructions Manual

Page: 14 / 114

14
Internet Explorer Setting
Basic Setting2 Page
This page sets fundamental camera and encoding parameters.
This page can be used during access using
A
admin
B
or
A
operator
B
.
Memo:
●
If you enter the following URL directly into the address bar of Internet Explorer, you can open the
[Basic Setting2] page without going through the Built-in Viewer.
http://192.168.0.2/cgi-bin/display.cgi?basicmenu2.html
●
Press the [OK] button to enable the new settings.
●
If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the
change was made.
●
"H.264 High" indicates the H.264 High Profile standard.
Settings (continued)
A
C
B
Click [Basic Setting2].