JVC VN-C215VP4U - Fixed Ip Network Mini Dome Instructions Manual Download Page 60

Page: 60 / 88

Setting

Access Restrictions Page

This page is for setting client restrictions.

This page can be used during access using

admin

●

Press the [OK] button to enable the new settings upon changing.

●

If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

●

This feature is targeted at JPEG acquisition. It does not impose restrictions on access via a web
browser or use of API.

Setting Using Internet
Explorer (continued)

Summary of Contents for VN-C215VP4U - Fixed Ip Network Mini Dome

























































































Search results

Summary of Contents for VN-C215VP4U - Fixed Ip Network Mini Dome

Reviews:

Related manuals for VN-C215VP4U - Fixed Ip Network Mini Dome

Brands by name

Popular brands

JVC VN-C215VP4U - Fixed Ip Network Mini Dome, Instructions Manual

Search results

Summary of Contents for VN-C215VP4U - Fixed Ip Network Mini Dome

Reviews:

Related manuals for VN-C215VP4U - Fixed Ip Network Mini Dome

Brands by name

Popular brands