JVC VN-C215VP4U - Fixed Ip Network Mini Dome Instructions Manual Download Page 46

Page: 46 / 88

Setting

Encoding Page

This page is for setting JPEG encoding parameters.

This page can be used during access using

admin

operator

●

Press the [OK] button to enable the new settings upon changing.

●

If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

●

When settings on this page is altered during playback using the built-in viewer, reboot the viewer.

Setting Using Internet
Explorer (continued)

Summary of Contents for VN-C215VP4U - Fixed Ip Network Mini Dome

























































































Search results

Summary of Contents for VN-C215VP4U - Fixed Ip Network Mini Dome

Reviews:

Related manuals for VN-C215VP4U - Fixed Ip Network Mini Dome

Brands by name

Popular brands

JVC VN-C215VP4U - Fixed Ip Network Mini Dome, Instructions Manual

Search results

Summary of Contents for VN-C215VP4U - Fixed Ip Network Mini Dome

Reviews:

Related manuals for VN-C215VP4U - Fixed Ip Network Mini Dome

Brands by name

Popular brands