JVC ViewFinder VF-HP840U Instructions Manual Download Page 2

2

Getting Started

1.

Read all of these instructions.

2.

Save these instructions for later use.

PORTABLE CART WARNING
(symbol provided by RETAC)

S3125A

IMPORTANT SAFEGUARDS

4.

Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

5.

Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

6.

Do not use this appliance near water - for example, near a bathtub, washbowl,kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, etc.

7.

Do not place this appliance on an unstable cart, stand, or table. The appliance may fall,
causing serious injury to a child or adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the manufacturer, or sold with the appliance.
Wall or shelf mounting should follow the manufacturer's instructions, and should use a
mounting kit approved by the manufacturer. An appliance and cart combination should be
moved with care.
Quick stops, excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.

8.

Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure reliable operation of
the appliance and to protect it from overheating, these openings must not be blocked or covered. The openings should
never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near or over a radiator or heat register.
This appliance should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

9.

This appliance should be operated only from the type of power source indicated on the marking label. If you are not sure
of the type of power supplied to your home, consult your dealer or local power company. For appliance designed to
operate from battery power, refer to the operating instructions.

10.

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it form the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.

These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances.

3.

All warnings on the product and in the operating instructions should be adhered to.

FOR USA

14.

Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.

15.

Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.

16.

Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.

d.

e. If the appliance has been dropped or the cabinet has been damaged.

f.

If the appliance does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the appliance to normal operation.

When the appliance exhibits a distinct change in performance - this indicates a need for service.

17.

When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.

18.

Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks
to determine that the appliance is in safe operating condition.

13.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

12.

Follow all warnings and instructions marked on the appliance.

11.

Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by persons
walking on it.

VF-HP840U_EN.book  Page 2  Thursday, January 17, 2008  2:48 PM

Summary of Contents for ViewFinder VF-HP840U





















Reviews: