manualshive.com logo in svg

JVC TK-C2201WPE(EX), Instruction Manual, Page: 3 / 32

Share
Download
JVC TK-C2201WPE(EX) Instruction Manual Download Page 3

Thank you for purchasing this product.

Before use, please read this "INSTRUCTIONS" and the information materials

included to ensure proper use of this product.

The model names (EX) are omitted in the text below.

These instructions are for TK-C2201WPU/TK-C2201WPE(EX).

TK-C2201WPE(EX) is not evaluated by UL.

Features

Easy DAY/NIGHT function (TK-C2201WPU)

DAY/NIGHT surveillance with auto IR cut filter on/off (Color/B&W shooting) (TK-

C2201WPE)

3D noise reduction (3DNR)

4 areas privacy mask

Built-in display mode (CRT or LCD selectable)

Outdoor-ready vandal and tamper resistant structure (complies with IP66)

How to read this manual

Conventions and symbols

Note

: Indicates operating precautions.

Memo

: Indicates reference data regarding limitations on functions, usage

and the like.

A

: Indicates a reference page or item.

Contents of this manual

JVC KENWOOD Corporation holds the copyright to this manual. Any part or all 

of this manual may not be reproduced without prior consent from the company.

Product names of other companies described in this manual are trademarks

or registered trademarks of the respective companies. Symbols such as 

, 

,

and 

 are omitted in this manual.

Design, specifications and other contents described in this manual are

subject to change for improvements without prior notice.

Introduction

3

Summary of Contents for TK-C2201WPE(EX)

































Reviews:

No comments