Mounting
1
Align (
) with the shooting direction, and mount the camera
onto the ceiling
Note
Mounting screw (not included)
The diameter of the attachment hole is
Φ
4.5 mm (3/16 inch).
Do not use flathead screws.
Align the (
) mark upwards when mounting the camera on the wall.
When using an impact screwdriver, do not tighten the screws fully.
Tighten using your hand instead. Failure to do so may damage the
outer case.
.
.
Adjusting images
After mounting is completed, adjust the images while checking the actual image.
Installation
15
