19
1.
Connecting the coaxial cable (
A
Pg. 15)
Lower the protection cover and connect the
connectors. Upon connecting, cover the
connectors using the protection cover.
2.
Connecting the AC 24 V/DC 12 V power
supply wires
Note:
●
To mount a heater (sold separately) to this
unit, make sure to connect it to an AC 24 V
supply during use.
3.
Binding the AC 24 V/DC 12 V power
supply wires with insulating tape
Make sure to bind the connecting portions of AC
24 V/DC 12 V power supply wires with insulating
tape.
4.
Storing cables
Upon connecting, push the connector into the
cable storage space of the camera unit.
Note:
●
When mounting the camera to the electrical
box, push the connector into the electrical
box.
●
While the camera unit is disconnected from
the base, be extremely careful not to drop the
camera unit.
S
]
Cable Connection
1
4
3
2
Coaxial Cable
Protection Cover
Solder or Caulk
Insulating Tape
Bind
insulating
tape
AC 24 V/DC 12 V
Power Supply
Wire
Cable Storage
Space
TK-C215VP4_JP.book Page 19 Wednesday, September 20, 2006 5:48 PM
