E-31
MODE SELECT Screen
Titles, image reversion, etc., are set.
Item
Functions and set values
Initial value
CAMERA
TITLE EDIT
REVERSE
MODE
ALM.TITLE
SIZE
ALARM
COLOUR
D.ZOOM
MAX
Bring up the CAMERA TITLE, EDIT screen.
(
Page 36)
Settings are executed for image reversion.
OFF: Image does not reverse.
R-L:
Left and right of the image are reversed.
U-D: Up and down of the image are reversed.
ALL: Up and down and left and right of the image are
reversed.
Set the size of the characters displayed in the case of
alarms.
This sets the colour of an alarm title.
[Set values: WHITE, YELLOW, CYAN, GREEN]
This function sets the maximum zoom ratio of the
electronic zooming.
[Set values: x1, x2, x4, x6, x8, x10]
MEMO
• The electronic zoom function can only be used by the
communication command of exclusive controllers (RM-
P2580, etc.).
• Note Picture quality deteriorates under electronic
zooming as it is accompanied by digital image
processing.
• When the electronic zoom magnification ratio is
increased, there may be blurring in the upper center left
of the screen. This is a characteristic of the main unit
and is not a malfunction.
–
OFF
DOUBLE
WHITE
x2
A L A R M
A L A RM
NORMAL
DOUBLE
MOTION DETECT Screen
Item
Functions and set values
Initial value
MODE
Settings are executed about the motion detecting function that emits alarm signals when
there exists any motion in the image. Alarm signals are output from the auxiliary terminals on
the back.
This sets ON/OFF of motion detecting function.
OFF:
Motion detecting function does not work.
ON:
Motion detecting function works.
OFF
