JVC TK-AM200U - Active Movement Color Dome Camera, Instructions Manual

Page: 21 / 36

21
CAMERA VIDEO ADJUST Screen
Item Function
Variable Factory
range setting
AGC MODE
SUPER AGC
SHUTTER
SPEED
ENHANCE
AV/PEAK
Sets the maximum gain of the AGC (Automatic
Gain Control).
• Set to OFF when the AGC function is not
used.
• Set to 20 dB when illumination is particu-
larly dim.
Used when the brightness is still insufficient
even if the AGC MODE is set at 20 dB.
ON: Gain level is increased.
OFF: Gain level is not increased.
∗
When SUPER AGC is ON;
• Dark areas of the screen may appear grainy.
• Gain will be set according to the setting of
the SUPER AGC with no relation to the AGC
MODE setting.
Used to set the electronic shutter speed for
each camera.
To reduce flickering caused by fluorescent light-
ing, set the electronic shutter speed to 1/100
in areas where the commercial power supply
frequency is 50 Hz, and to 1/60 in areas where
the frequency is 60 Hz.
Contour compensation function that enhances
the sharpness of the monitor screen.
LOW: Low contour enhancement
HIGH: High contour enhancement
Sets the exposure detection as a ratio of the
average value and the peak value.
• AVERAGE value large: Increase the AVER-
AGE value when portions other than the
highlighted areas of the screen are dark and
look corrupted. (Ex. 10/0)
• PEAK value large: Increase the PEAK value
when halation occurs in the highlighted ar-
eas of the screen. (Ex. 5/5)
OFF
10 dB
20 dB
ON
OFF
1/60
1/100
LOW
HIGH
10/0
9/1
8/2
7/3
6/4
5/5
10 dB
OFF
1/60
HIGH
8/2
Used for setting functions related to the video image of each camera.