Filename [DVM600US_04DiscInfo.fm]
Masterpage:Left+
10
EN
DISC INFORMATION
Page 10Monday, 25 September 2006 13:54
DVD VIDEO Marks
Sometimes marks are printed on a DVD disc and/or on its
packaging to indicate information regarding the contents and
functions of the disc. Check the marks indicating the contents and
functions of the disc. Note, however, that in some cases a disc may
not include a mark even for a function it supports.
Marks related to video
Marks related to audio
Placing A Disc
Opening the disc tray
Press
M
to open the disc tray.
●
Pressing the button again closes the disc tray.
●
Use the button to open and close the disc tray.
●
Do not block the disc tray with your hand while it is opening or
closing as this may result in hardware failure.
●
Do not place unplayable discs or any object other than a disc on
the disc tray.
●
Do not press down strongly on the disc tray or place any heavy
objects on it.
Discs without cartridges
Place the disc on the disc tray with the label side facing up. Since
disc size changes depending on the disc to be played back, be
sure to correctly align the disc with the grooves for its size. If the
disc is not in its groove, it may be scratched or otherwise damaged.
To insert an 8 cm disc, place it according to the inner groove.
DVD-RAM discs contained in cartridges
Double-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the side
you wish to play back or record facing down. If you insert the disc
with
A
Side A
B
facing down, programs are recorded on the side A.
Single-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the label
side facing up.
Number of subtitles
Number of angles
Recorded under the
standard 4:3 aspect
ratio
Screen includes black
bands at the top and
the bottom of image
which has a standard
4:3 aspect ratio (letter
box)
Video playback is in Wide video mode (16:9) on
wide televisions, but in letter box on televisions
with standard 4:3 aspect ratio.
Video playback is in Wide video mode (16:9) on
wide televisions, but pan and scan is used on
televisions with standard 4:3 aspect ratio (either
the left or right side of the image is cut-out).
Number of audio tracks
Dolby Digital Stereo Creator mark
Developed by Dolby Laboratories. It enables
audio recording in high-quality stereo Dolby
Digital.
DTS (Digital Theater Systems)
You can enjoy DTS audio if you connect an
amplifier with a built-in DTS decoder to the
DIGITAL OUT connector of the unit.
EJECT
DV/HDD/DVD
REC MODE
INSTANT REPLAY
AUDIO DUB.
INSERT
REC
DVD
DV IN/ OUT
REC
PAUSE
PLAY
FF
REW
STOP
PEN/
CLOS
E
STOP
PLAY
REMA
IN
REC
MOD
E
SLOW
<<
>>
REC
PAUS
E
REW
FF
CH
DV IN
REC
LINK
DVD
TIME
R
DVD
DVD
REC
VCR
DUBB
ING
PULL
-OPE
N
Disc tray
DVM600US_00.book Page 10 Monday, September 25, 2006 1:54 PM