(No.MB236)1-13
3.1.10 Removing the FL board
(See Fig.14)
• Prior to performing the following procedures, remove the top
cover assembly or metal cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the
screw
R
attaching the FL board.
(2) Take out the FL board from the front panel assembly.
Reference:
• When attaching the FL board, align the section
f
of the front
panel assembly to the right side of the FL board.
• After attaching the FL board, passing the card wire through
the section
g
.
Fig.14
3.1.11 Removing the key board
(See Figs.15 to 16)
• Prior to performing the following procedures, remove the top
cover assembly or metal cover, front panel assembly and FL
board.
• It is not necessary to remove the FL board.
[For XV-THS9 and
XV-THS7 models]
(1) From the front side of the front panel assembly, pull the vol-
ume knob out of the front panel assembly in the direction of
the arrow. (See Fig.15.)
(2) From the inside of the front panel assembly, release the
seven claws
h
attaching the front cover assembly.
[For XV-
THS8 model]
(See Fig.16.)
(3) Remove the front cover assembly in the direction of the ar-
row.
[For XV-THS8 model]
(See Fig.16.)
(4) Remove the three screws
S
attaching the key board and
take out the key board from the front panel assembly. (See
Fig.16.)
Fig.15
Fig.16
3.1.12 Removing the SD card board
(See Fig.17) [For XV-THS9 and XV-THS7 model]
• Prior to performing the following procedures, remove the top
cover assembly or metal cover, front panel assembly and key
board.
From the top side of the front panel assembly, remove the SD
card board in the direction of the arrow while releasing the sec-
tions
i
of the front panel assembly.
Fig.17
R
g
FL board
f
Volume knob
Front panel assembly
S
h
Key board
Front cover
S
Key board
[XV-THS8]
[XV-THS9, XV-THS7]
Front panel assembly
i
SD board
