1-10 (No.MB236)
3.1.3 Removing the front panel assembly
(See Figs.4 and 5)
• Prior to performing the following procedures, remove the top
cover assembly or metal cover.
(1) From the top side of the main body, disconnect the card
wires from the connectors (
CN451
,
CN452
) on the main
board. (See Fig.4)
(2) Disconnect the card wire from the connector
CN802
on the
SD card board.
[For XV-THS9 and XV-THS7 models]
(See Fig.4.)
(3) Remove the screw
C
attaching the earth wires to the main
board. (See Fig.4)
Reference:
When attaching the screw
C
, attach the earth wires with
it. (See Fig.4)
(4) From the bottom side of the main body, remove the four
screws
D
attaching the front panel assembly. (See Fig.5)
(5) Remove the front panel assembly in the direction of the ar-
row while releasing the joint
b
. (See Fig.5)
Fig.4
Fig.5
C
CN452
Earth wire [TH-S9,TH-S7]
Earth wire
CN451
CN802
Main board
SD board
D
D
b
Front panel assembly
