1-14 (No.MB206)
3.16 Removing the fan motor
(See Figs.21 and 22)
• Remove the top cover.
(1) From the top side of the main board, remove the tie bands
bundling the wires. (See Fig.21.)
Reference:
After reassembling, bundle the wires with the new tie
bands as before. (See Fig.21.)
(2) Disconnect the wire from the connector
CN207
on the sec-
ondary board. (See Fig.21.)
(3) Remove the two screws
W
attaching the fan bracket. (See
Fig.21.)
(4) Take out the fan motor with the fan bracket.
(5) Remove the tie band bundling the wire. (See Fig.22.)
Reference:
After reassembling, bundles the wire with the new tie
band as before. (See Fig.22.)
(6) Remove the screw
X
and screw
X'
attaching the fan motor
to the fan bracket. (See Fig.22.)
Reference:
When attaching the screw
X'
, attach the fan cover with it. (See
Fig.22.)
Fig.21
Fig.22
CN207
Wire
Wires
Fan bracket
Fan motor
Tie bands
Secondary board
W
Fan motor
Tie band
Fan cover
Fan bracket
Wire
X
X'
www.freeservicemanuals.info
4/22/16
Published in Heiloo, Holland.
