RX-DV5RSL
1-6
Prior to performing the following procedures, remove
the top cover and rear panel.
Cut off the tie band fixing the harness.
Disconnect the video board from the connector
CN911 CN912 on the main board.
Disconnect the DSP board from the connector
CN612 on the main board,
Disconnect the card wire from the connecter CN614
on the main board.
Disconnect the video select board from the
connector CN411, CN412 on the main board.
1.
2.
3.
4.
5.
Removing each board connected to the
main board
(See Fig.6 to 10)
Fig.8
CN241
CN212
CN612
Fig.7
DSP board
CN412
CN612
Video select
board
Amplifier board
Fig.6
DSP
board
Amplifier
board
CN201
CN612
CN212
CN231 CN241
DSP
board
S-video
board
Amplifier board
CN231
Fig.9
CN612
CN212
Video select
board
CN241
CN231
Fig.10
CN231
CN241
Main
board
CN212
CN612
CN412
Amplifier board
CN911
/ CN912
CN911
/ CN912
Video board
CN911
/ CN912
CN614
CN412
CN614