Registering a BLUETOOTH device
You can listen to music from a BLUETOOTH device
through the System.
NOTE
0
In order to use these functions, the device must be
compatible with AVRCP and A2DP profiles.
0
Some BLUETOOTH devices may not be available
to the System.
1
Switch the source to “BLUETOOTH”.
.
Remote control
Main unit
.
0
“Ready” is displayed when any device is not
registered to the System.
0
While “Connecting” is blinking, you cannot
perform any operations except for turning the
System off.
2
On your device, set “Bluetooth” to ON.
0
On iPod touch/iPhone/iPad and an Android
device, select “Bluetooth” from “Settings”.
0
On a PC, open the screen for the BLUETOOTH
setup.
0
Refer to the instruction manual of your device
for further details.
3
Select “RV-S5” from the network list.
.
RV-S5
Bluetooth
The pairing is completed and the target
BLUETOOTH device is connected to the System
automatically.
0
“Connected” will be displayed on the System.
0
When the target device requests the passkey
during pairing operation, enter “0000”.
4
On iPod touch/iPhone/iPad, start a “Music”
application to display the “Now Playing”
screen.
0
On a PC, start iTunes or Windows Media
Player 12. Start the BLUETOOTH compatible
application on other BLUETOOTH compatible
devices.
0
Refer to the instruction manual of your device
for further details.
5
Tap or click the AirPlay icon (
) to select
“RV-S5”.
.
RV-S5
RV-S5
6
Play back music.
Audio is output from the System.
0
Playback may start automatically with some
Bluetooth devices.
NOTE
0
The pairing is necessary only when connecting for
the first time.
0
The BLUETOOTH device last used will be
connected automatically by turning on the Bluetooth
function of your device while “Connecting” blinks on
the screen.
0
To re-connect another BLUETOOTH device,
operate the device to connect while “Ready”
appears on the screen.
0
Try again from the beginning if connection cannot
be established.
26
Listening to BLUETOOTH device