background image

Printed in Japan

KCS-8422  CEFS790GKN1103

“JVC” is the trademark or registered trademark of Victor Company of Japan, Limited.

DISTRIBUTED BY 

Simulated pictures.

The values for weight and dimensions are approximate.

E.&O.E. Design and specifications subject to change without notice.

Video, Digital (bi-directional)

Interface: SMPTE 259M, 292M
Data Rate: 270Mbps or 1.5Gbps
Input Level: 800mV (peak to peak)
Input/Output Impedance: 75

Output Impedance: 75

Bit-Error Rate (@ -22 dBm): 10 – 12
Jitter (pathological data): < 0.2UI
Rise/Fall Times: < 270ps

Video, Analog (bi-directional)

Interface: RS170, NTSC, PAL
Frequency Response 

30Hz - 4.2MHz: 

±

0.15dB 

8MHz: -3dB

Video Signal to Noise Ratio: 

6

 72dB

Differential Gain: < 2%
Differential Phase: < 1

°

 

Audio

Number of Channels: 1 – 2 
Type: Balanced, Line Level
Impedance: >15K

Maximum Input Level: 24dB

µ

Quantization: 24bits, 128x (oversampled)
Sample Rate: 48kS/sec.
Frequency Response: 

±

0.1dB, 20Hz to 20KHz

I

ntercom

Number or Channels: 1
Interface Types (Base): RTS or Clear-Com and 4-Wire
Frequency Response: 200 – 18KHz 

±

 3dB

Max Distortion: 

;

 0.5%

Noise: < -60dB

µ

Max Gain (RTS or Clear-Com): 

:

 24dB 

Min Gain (RTS or Clear-Com): 

;

 -45dB

Electro-Optical

Operating Wavelengths: 1300nm/1550nm
TX Laser Output Power (std./opt): -6dBm/0dBm
RX Sensitivity, HD/SDI: -22 dBm
Fiber Compatibility: Single Mode

Mechanical/Environmental

Dimensions (W x L x D):  

Camera Unit: 2.5" x 6.5" x 2.2"/6.35 x 16.51 x 5.58 cm
Base Station: 17.5" x 9" x 1.75"/44.45 x 22.86 x 4.44 cm 
Power Wafer: 5" x 6.12" x 2.2"/12.7 x 15.54 x 5.58 cm 

Weight: 

Camera Unit: 1.5 lbs./0.68 kg 
Base Station: 5.0 lbs./2.27 kg 
Power Wafer: 1.5 lbs./0.68 kg 

Power Consumption 

Camera Unit: 8 watts@10-18VDC 
Base Station (Tac Fiber): 10 watts@10-18VDC

Temperature Range: -25

°

 to +55

°

C

Humidity Range: 0 to 95% RH, Non-condensing

Specifications

Product and company names mentioned here are trademarks or registered trademarks of their respective owners

Round = Neutrik plug

Diamond = SMPTE plug

Square = Plug type irrelevant

■ 

◆ 

Green = Anton Bauer mount

■ 

◆ 

Red = IDX mount

■ 

◆ 

Black = Battery type irrelevant

White field = RTS intercom 

Greyed field = ClearCom intercom

Fiber Cables

FS-CABTAC100

100 feet Tactical Cable/OpticalCON Connector

FS-CABTAC200

200 feet Tactical Cable/OpticalCON Connector

FS-CABTAC500

500 feet with reel Tactical Cable/OpticalCON Connector

FS-CABTAC1000

1000 feet with reel Tactical Cable/OpticalCON Connector

FS-CABTAC2000

2000 feet with reel Tactical Cable/OpticalCON Connector

FS-CABHYB100

100 feet Hybrid Cable/OpticalCON Connector

FS-CABHYB200

200 feet Hybrid Cable/OpticalCON Connector

FS-CABHYB500

500 feet Hybrid Cable/OpticalCON Connector

FS-CABHYB700

700 feet Hybrid Cable/OpticalCON Connector

FS-CABHYB100S

100 feet Hybrid Cable/SMPTE304M Connector

FS-CABHYB200S

200 feet Hybrid Cable/SMPTE304M Connector

FS-CABHYB500S

500 feet Hybrid Cable/SMPTE304M Connector

FS-CABHYB700S

700 feet Hybrid Cable/SMPTE304M Connector

Optional Fiber Cable and Connector Type

FS-790TNRG

FS-790TNCG

FS-790PNARG FS-790PNACG FS-790PNVRG FS-790PNVCG FS-790PSARG FS-790PSACG FS-790PSVRG FS-790PSVCG

KA-F790NG

KA-F790SG

RM-FP790TNRG

RM-FP790TNCG

RM-FP790PNRG

RM-FP790PNCG

RM-FP790PSRG

RM-FP790PSCG

KA-PW790AG

KA-PW790VG

AA-FP790G

VC-P790RMG

Type

Camera 
Adapter

Base Station 

Power Wafer 

Power Supply 

Remote Cable 

Specifications Available with Each System

Business Solution Division of

Victor Company of Japan, Ltd.

has received ISO9001 Certifications.

JMI-0181

Realize full studio functionality for field 
applications with one single fiber cable

The KA-F790 custom designed camera back transceiver 

module attaches directly to the GY-HM790 body using a 

hidden 68-pin connector and enables broadcasters to 

leverage the GY-HM790’s full studio functionality in the field. 

It connects the camera via SMPTE hybrid (powered) or 

tactical (unpowered) fiber optic cable to the RM-FP790 

CopperHead base station typically located in a control 

room, flypack or OB van.

Ole Miss Athletics & Media Support Group

Edge Hill University

WZVN

Integrated Simplicity

ProHD Fiber Remote System

FS-790

FS-790 is marketed under Telecast brand.

Picture shows GY-HM790 with KA-F790NG Camera Adapter and KA-PW790AG Power Wafer

Summary of Contents for ProHD FS-790







Reviews: