Turning on/off the System
.
Main unit
Remote control
0
You can also turn on the System by pressing the
source buttons such as
[CD]
on the remote
control.
Setting the clock
Set the clock to use the timer setting, etc.
1
Display the clock setting screen.
.
2
Select “CLOCK”.
.
/
(Press repeatedly)
.
CLOCK
0
If you have already set the clock, after
pressing [CLOCK/TIMER], press [
H
]/[
I
]
repeatedly to display “CLOCK”, then press
[SET].
3
Adjust the hour.
.
/
(Press repeatedly)
4
Repeat Step 3 to adjust the minute.
After adjusting the minute, “COMPLETE” is
displayed and the setting is completed.
NOTE
0
The clock may gain or lose 1 to 2 minutes per
month. You may need to readjust the clock
periodically.
0
Set the clock again if the AC power cord is
unplugged or the System is turned off due to the
power failure.
Getting started
1
Select a source.
.
/ / / / /
Remote control
.
Main unit
(Press repeatedly)
2
Adjust the volume.
.
(Press repeatedly)
(Press repeatedly)
Main unit
Remote control
.
0
Adjustable range: MIN (0) to MAX (40)
14
Basic operations
Downloaded from www.vandenborre.be
