JVC MX-J700 Page 87 Instructions Manual Download

Page: 87 / 90

– 24 –

English

Maintenance

To get the best performance of the unit, keep your discs, tapes, and mechanism clean.

Handling cassette tapes

• If the tape is loose in its cassette, take

up the slack by inserting a pencil in
one of the reels and rotating.

• If the tape is loose, it may get

stretched, cut, or caught in the
cassette.

• Be careful not to touch the tape

surface.

• Avoid the following places to store the

tape:
— In dusty places
— In direct sunlight or heat
— In moist areas
— Near a magnet

Handling discs

• Remove the disc from its case by

holding it at the edge while pressing the
center hole lightly.

• Do not touch the shiny surface of the

disc, or bend the disc.

• Put the disc back in its case after use to

prevent warping.

• Be careful not to scratch the surface of

the disc when placing it back in its
case.

• Avoid exposure to direct sunlight,

temperature extremes, and moisture.

To clean the disc
Wipe the disc with a soft cloth in a
straight line from center to edge.

DO NOT use any solvent — such as conventional
record cleaner, spray, thinner, or benzine — to
clean the disc.

EN17-26.MX-J500[U]/f

00.2.17, 6:08 PM

www.DataSheet4U.com

Summary of Contents for MX-J700



























































































Search results

Summary of Contents for MX-J700

Reviews:

Related manuals for MX-J700

Brands by name

Popular brands

JVC MX-J700, Instructions Manual

Search results

Summary of Contents for MX-J700

Reviews:

Related manuals for MX-J700

Brands by name

Popular brands