background image

20

EN

Connections & Installation (continued)

Installing the Camera

1

Attach the Safety Wire

Follow the diagram to pull out the Safety Wire from the
ceiling mount, followed by hanging it to the Fastening Hook
for Safety Wire on the camera.

2

Check that the Locking Screw is loosened

The camera cannot be properly installed if the Locking
Screw of the ceiling mount is not loosened.

3

Fit the camera to the ceiling mount

Fit the camera to the ceiling mount by aligning the 

A

F

 mark

B

 of the

camera with the 

A

G

 mark

B

 of the ceiling mount. Additionally, check

the positions of the Camera Clamping Bracket and the Locking
Screw of the ceiling mount before fitting the camera.

4

Turn the camera

Make sure that the camera is not tilted, followed by pushing
the camera against the ceiling mount and turning it in the
clockwise direction until it stops.Upon doing so, check that
the Camera Clamping Bracket is aligned with the position of
the Locking Screw of the ceiling mount.

5

Fasten the Locking Screw

Fasten the Locking Screw using a Phillips-head screwdriver.

To dismantle the camera, perform procedure from 

1

 to 

5

 in 

the reverse order.

CAUTION

Be sure to connect the Safety Wire. Otherwise, the camera
may fall to the ground.

Do  not leave the camera hanging from the Safety Wire.
The spring of the Safety Wire may lose its elasticity, and
wire may get caught, thus preventing the camera to fit
properly to the ceiling mount.

Safety Wire

Fastening Hook for 
Safety Wire

Locking Screw

Camera

Clamping

Bracket

A

G

Mark

B

Ceiling Mount

Camera

CAUTION

If the Locking Screw is not securely fastened, the camera
may vibrate or fall down. Be sure to fasten the Locking
Screw firmly.

Camera Clamping Bracket

Locking Screw

Turn camera in 
clockwise direction

Locking Screw

Fasten the Locking 
Screw

Summary of Contents for LWT0254-001B-H













































Reviews: