(No.YA606<Rev.002>)
VPT
Printed in Japan
4.7
ADJUSTMENT PROCEDURE
4.7.1 VIDEO CIRCUIT
SECTION 5
TROUBLESHOOTING
This service manual does not describe TROUBLESHOOTING.
Item
Measuring
instrument
Test point
Adjustment part
Description
WHITE
BALANCE
Remote
control unit
Signal
generator
[White Balance]
Normal R
Normal G
Normal B
(1) Set COLOUR TEMP. to "
Normal
".
(2) Select "
White Balance
" from the FACTORY
MODE.
(3) Receive a PAL 75% all white signal.
(4) Set the setting values of
<Normal R>
,
<Normal G>
and
<Normal B>
to the values in
the left table.
(5) Adjust the setting values of
<Normal R>
and
<Normal R>
so that the screen becomes
maximum white.
NOTE:
When the normal mode is adjusted, other modes
(cool/ warm) are automatically adjusted.
Normal R
Normal G
Normal B
50
31
26
Setting Item
Initial setting value
[WHITE BALANCE SETTING]
Victor Company of Japan, Limited
Display category 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, Japan
Summary of Contents for LT-26DC9BH
Page 90: ...2 92 No YA606 Rev 001 No YA606 Rev 001 2 91 PATTERN DIAGRAMS MAIN PWB PATTERN SOLDER SIDE ...
Page 91: ... No YA606 Rev 001 2 93 2 94 No YA606 Rev 001 MAIN PWB PATTERN PARTS SIDE ...
Page 92: ...2 96 No YA606 Rev 001 No YA606 Rev 001 2 95 MPEG PWB PATTERN SOLDER SIDE ...
Page 93: ... No YA606 Rev 001 2 97 2 98 No YA606 Rev 001 MPEG PWB PATTERN PARTS SIDE ...
