11
Mount this unit to the EIA rack.
1
Remove the screws
A
on the four stands at the
bottom
Remove the stands.
2
Mount the unit to the rack using the screws
B
Secure to the rack with the optional screws x4 (M5 x 10 mm)
.
Memo :
●
If the RM-HP790DU/RM-HP790DE is rack-mounted, be
sure to insert ventilated panels above and below it in order
to improve ventilation. Do not stack two RM-HP790DU/
RM-HP790DE units or place any object on top of a RM-
HP790DU/RM-HP790DE unit.
●
In addition, make sure to keep surrounding temperature of
this unit below 40
f
during use.
1
Connect the camera to the RM-HP790DU/RM-HP790DE
using a proper connection method
2
Press the [POWER] switch of the RM-HP790DU/RM-
HP790DE to ON
Memo :
●
When an item is controllable from both the RM-HP790DU/
RM-HP790DE and the camera, the control from the
camera is defeated. Functions not available on the
camera cannot be controlled from this unit.
●
When connecting the RM-HP790DU/RM-HP790DE to the
camera, do not connect a local remote controller to the
camera.
●
After turning the RM-HP790DU/RM-HP790DE OFF, wait
at least 10 secends before turning it ON again.
Rack Mounting
B
B
A
Rack mount bracket
(x4)
Turning the Power ON
PAINT
AUTO
B
R
W.BAL
AUTO
MANU
WHITE
MASTER BLACK
POWER
I
O
IRIS
P
B
A
PRESET
CLOSE
OPEN
MID
REMOTE CONTROL UNIT RM-HP790
[POWER] switch